树木干形模拟技术探讨

林业资源管理 ›› 2013, Vol. 0 ›› Issue (4): 37-41.

树木干形模拟技术探讨

段爱国, 张建国

中国林业科学研究院林业研究所国家林业局林木培育重点实验室,北京 100091

收稿日期:2013-06-01 修回日期:2013-06-13 出版日期:2013-08-28 发布日期:2020-11-23
作者简介:段爱国(1976-),男,湖北荆州人,副研究员,博士,硕导,主要研究领域与方向:人工林定向培育。Email:duanag@caf.ac.cn
基金资助:
中国林科院林业研究所所长基金(RIF201309);国家“十二五”科技支撑项目(2012BAD01B0201)

Modelling Progress of Stem Profiles

DUAN Aiguo, ZHANG Jianguo

Research Institute of Forestry of Chinese Academy of Forestry;Key Laboratory of Tree Breeding and Cultivation, State Forestry Administration,Beijing 100091,China

Received:2013-06-01 Revised:2013-06-13 Online:2013-08-28 Published:2020-11-23

摘要/Abstract

摘要： 干曲线模型是树木材种出材量与出材率估算及经济效益评估的科学依据。介绍了干曲线模型的分类及其国内外研制现状,重点从干形指标、干曲线模型与林分经营间作用关系的角度,深入阐述了响应林分经营因子的干曲线模型研制的理论基础及技术进展,分析指出了树木干形模拟技术存在的问题,以期为今后树木干形的科学模拟提供参考。

关键词: 干形, 干曲线, 材种出材率, 经营, 模拟

Abstract: Taper model is scientific basis for the accurate prediction of total stem volume,merchantable volume and financial benefits of trees or stands.The classification and research status of taper model were introduced,and in view of the relationship between taper indices,taper model and stand management,this paper deeply expounded the theoretical basis and technical progress of taper model,which reflects the effect of stand management variables. And furtherly it pointed out that modelling of stem profiles in stands under different management conditions is development trendency and technology of taper model building.

Key words: stem profiles, taper model, merchantable volume, stand management, modelling, progress

中图分类号:

S758

段爱国, 张建国. 树木干形模拟技术探讨[J]. 林业资源管理, 2013, 0(4): 37-41.

DUAN Aiguo, ZHANG Jianguo. Modelling Progress of Stem Profiles[J]. FOREST RESOURCES WANAGEMENT, 2013, 0(4): 37-41.

参考文献

[1]北京林业大学.测树学[M].北京:中国林业出版社,1987.
[2]白云庆,郝文康,蒋伊尹,等.测树学[M].哈尔滨:东北林业大学出版社,1987.
[3]孟宪宇.削度方程和林分直径结构在编制材种表中的重要意义[J].北京林业大学学报,1991,13(2):14-20.
[4]何美成.关于树干削度方程[J].林业资源管理,1993(5):42-50.
[5]Kozak A.A variable-exponent taper equation[J].Can.J.For.Res.,1988,18(11),1363-1368.
[6]Burne J C,Reed D D.Complex compatible taper and volume estimation systems for red and loblolly pine[J].For.Sci.,1986(32):423-443.
[7]Reed D D,Byrne J C.A simple,variable form volume estimation system[J].For.Chron.,1985(61):87-90.
[8]Sharma M,Oderwald R G.Dimensionally compatible volume and taper equations[J].Can.J.For.Res.,2001(31):797-803.
[9]阿努钦,王锡嘏译.测树学[M].北京:中国林业出版社,1958.
[10]薛亚琴,金敬子.用样条函数方法拟合林木干形曲线的研究[J].吉林林学院学报,1987,3(4):42-47.
[11]Demaerschalk J P.Coverting volume equations to compatible taper equations[J].For.Sci.,1972,18(3):241-245.
[12]Jiang L C,Brook J R,Wang J X.Compatible taper and volume equations for yellow-poplar in West Virginia[J].For.Eco.Mana.,2005(213):399-409.
[13]Max T A,Burkhart H E.Segmented polynomial regression applied to taper equations[J].For.Sci.,1976(22):283-289.
[14]胥辉.树干削度方程研究概述[J].河北林学院学报,1996,11(3):297-301.
[15]Newnham R M.Variable-form taper functions for four Alberta tree species[J].Can.J.For.Res.,1992(22):210-223.
[16]Brink C,Gadow K V.On the use of growth and decay functions for modeling stem profiles[J].Edv.Medizin.U.Bio.,1986,17(2):20-27.
[17]Zakrzewski W T.A mathematically tractable stem profile model for jack pine in Ontario[J].N.J.Appl.For.,1999(16):138-143.
[18]Sharma M,Zhang S Y.Variable-exponent taper equations for jack pine,black spruce,and balsam fir in eastern Canada[J].For.Eco.Mana.,2004(198):39-53.
[19]Sharma M,Parton J.Modeling stands density effects on taper for Jack pine and Black Spruce plantations using dimentional analysis[J].For.Sci.,2009,55(3):268-282.
[20]Hjelm B.Taper and volume equations for poplar trees growing on farmland in Sweden[M].Swedish university of agricultural sciences.Uppsala,2011:9-40.
[21]孟宪宇.削度方程和出材率表的研究[J].南京林产工业学院学报,1982(1):122-133.
[22]张铁砚.商品材出材率预测方法的研究[J].林业资源管理,1992(3):37-49.
[23]李梦.长白落叶松人工林林分材种出材率的研究[J].东北林业大学学报,1994,22(4):33-39.
[24]江希钿.杉木人工林二元材种出材率表的编制[J].林业勘察设计,1997(2):1-4.
[25]江希钿.马尾松可变参数削度方程及应用[J].福建林学院学报,2000,20(4):294-297.
[26]郑小贤.用树干3个部位的直径建立立木干曲线方程[J].东北林业大学学报,1997,25(4):56-58.
[27]姜立春,李凤日,刘瑞龙.兴安落叶松树干削度和材积相容模型[J].北京林业大学学报,2011,33(5):1-7.
[28]刘景芳,童书振.杉木林经营新技术[J].世界林业研究:专辑,1996:46-98.
[29]侯元凯,翟明普.桐干形培育研究进展[J].林业科学,1999,35(3):76-83.
[30]蔡坚,潘文,王保华.林分密度对湿地松林木干形影响的研究[J].广东林业科技,2006,22(2):6-11.
[31]陈孝丑.不同修枝强度对杉木干形的影响[J].林业科技开发,2007,21(3):86-88.
[32]惠刚盈.广义干曲线方程及其应用[J].林业资源管理,1999(6):175-180.
[33]佟金权,盛炜彤.杉木人工林广义干形模型的研究[J].林业科学研究,2000,13(3):239-243.
[34]Brooks J R,Jiang L C,Ramazan O.Compatible stem volume and taper equations for Brutian pine,Cedar of Lebanon,and Cilicica fir in Turkey[J].For.Eco.Mana.,2008(256):147-151.
[35]Hussein K A.Parameter-parsimonious taper functions for describing stem profiles[J].Sci.Sil.Sin.,2008,44(6):20-27.